0194011000【PDF 2/4 页】CONN PWR 12-14AWG SELF-CONTAINED

您好，
买卖IC网欢迎您。
请登录
免费注册

1页 [2页]3页 4页

COC-2 Self Contained Power Connector Installation Instructions

For 3 Wire Cable with Ground Applications

The 3-circuit connector is used to splice solid nonmetallic cable 14/3 and 12/3 with ground.

Wire

Housing

Range

Optional

Optional Bench

AWG

12-14

Order No.

19401-1000 (COC-2)

Hand Tool

19285-0074

Arbor Press

64006-0200

Color

White

Reference Information

UL File Number: E182087

CSA File Number: LR18689-C53

NEC Article: 550, 551, and 545

HUD Section: 3280.801

Current: 20A

Voltage: 600V

Installation Procedure:

1. Carefully strip and prepare the wires to the configuration as shown in Figure 1 using helpful hints

shown in photographs of Figure 2.

2. Hold the clear strain-relief cover with bottom facing upward as shown in Figure 3.

3. Lay wires into locator slots, making sure the red and black wires are placed into locator slots with

the polarization stop as shown in Figure 3. If cable is flat, squeeze into round shape to fit.

4. Press the cable sheath into the integral strain relief slot as shown in Figure 3 . Trimming of center

wires and possibly others will be necessary. Wires must not extend beyond the stops as shown

in Figure 4!

5. While holding the strain relief cover, position the housing’s hinge posts into the hinge slots and

press down until both lock into place as shown in Figure 4.

6. Close the strain relief cover and housing by hand . Place the connector assembly into Molex tool

(preferred) as shown in Figure 5. Squeeze the tool until the connector bottoms out and the

locking latches engage on both sides. OR alternately, squeeze the top and bottom closed with

tongue and groove pliers as shown in Figure 5.1 . Pliers must be a minimum of 10" long. Squeeze

firmly on both sides, squarely across the connector between ribs A and B (labeled in Figure 5.1)

to ensure wires seat completely into slots.

7. Inspect the connector to ensure the wires have been properly engaged into the housing assembly

contacts. A properly terminated wire is fully seated into its proper slots with no significant bow of

the cover. If the wires extend past the insulation stops, the wires must be re-terminated with a

NEW CONNECTOR. Once the cover has been closed the connector cannot be re-used. Failure

to comply with this procedure may result in the failure of the connector.

8. Mating and un-mating the completed connector is illustrated in Figure 6.

19401-1002 REV F

发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

*型号	*数量	厂商	批号	封装

添加更多采购

我的联系方式

*

*

*

相关PDF资料

0194021000 CONN 12-14AWG TAP SPLICE

0194030011 SC POWER CONN 14AWG RND CBL

0194031300 POWER CONN 10 AWG 194031300

0194031310 SC POWER CONN 14AWG RND CBL TIN

0194210001 SC POWER CONNECTOR 12AWG ROUND

0194210002 SC POWER CONN 12AWG BLUE COVER

02KR-8M-P CONN RECEPT IDC 2POS 2.0MM

0358972410 040/090 MALE HSG 24POS

相关代理商/技术参数

0194021000 功能描述:CONN 12-14AWG TAP SPLICE RoHS:是类别:连接器，互连式 >> 矩形 - 自由悬挂，面板安装系列:* 标准包装:50 系列:AMPMODU 系统 50 连接器类型:插座触点类型：:母形插口位置数:34 间距:0.050"（1.27mm）行数:2 行间距:0.100"（2.54mm）安装类型:自由悬挂紧固型:销锁电缆端接:IDC 导线类型:带状缆线线规:30-32 AWG 特点:馈通触点表面涂层:金触点涂层厚度:30µin（0.76µm）颜色:黑包装:散装

0194021010 制造商:Molex 功能描述:12 SCPC TAP STRANDED

0194021011 制造商:Molex 功能描述:14-16 SCPC TAP STRANDED

0194025000 制造商:Molex 功能描述:CROSS OVER CONNECTOR CAP (194025000) - Bulk

0194030005 制造商:Molex 功能描述:MALE WATERPROOF END CAP ASSEMBLY - Bulk

0194030011 功能描述:SC POWER CONN 14AWG RND CBL RoHS:是类别:连接器，互连式 >> 矩形 - 自由悬挂，面板安装系列:* 标准包装:50 系列:AMPMODU 系统 50 连接器类型:插座触点类型：:母形插口位置数:34 间距:0.050"（1.27mm）行数:2 行间距:0.100"（2.54mm）安装类型:自由悬挂紧固型:销锁电缆端接:IDC 导线类型:带状缆线线规:30-32 AWG 特点:馈通触点表面涂层:金触点涂层厚度:30µin（0.76µm）颜色:黑包装:散装

0194031010 功能描述:SELF CONTAINED POWER CONN 12GA RoHS:是类别:连接器，互连式 >> 矩形 - 自由悬挂，面板安装系列:* 标准包装:50 系列:AMPMODU 系统 50 连接器类型:插座触点类型：:母形插口位置数:34 间距:0.050"（1.27mm）行数:2 行间距:0.100"（2.54mm）安装类型:自由悬挂紧固型:销锁电缆端接:IDC 导线类型:带状缆线线规:30-32 AWG 特点:馈通触点表面涂层:金触点涂层厚度:30µin（0.76µm）颜色:黑包装:散装

0194031011 功能描述:SELF CONTAINED POWER CONN 16-14 RoHS:是类别:连接器，互连式 >> 矩形 - 自由悬挂，面板安装系列:* 标准包装:50 系列:AMPMODU 系统 50 连接器类型:插座触点类型：:母形插口位置数:34 间距:0.050"（1.27mm）行数:2 行间距:0.100"（2.54mm）安装类型:自由悬挂紧固型:销锁电缆端接:IDC 导线类型:带状缆线线规:30-32 AWG 特点:馈通触点表面涂层:金触点涂层厚度:30µin（0.76µm）颜色:黑包装:散装